specification control drawing tyco electronics corporation 305 constitution drive menlo park, ca 94025, usa raychem products title : in-line splice sealing system, 2 or 3 to 1 unless otherwise specified dime nsions are in millimeters. inches dimensions are between brackets. document no.: D-436-0115 tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron tyco electronics reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. date: 14-nov.-00 doc issue: 1 drawn by: m. foronda replaces: n/a dcr number: d001275 prod. rev. a scale: none size: a sheet: 1 of 1 if this document is printed it becomes uncont rolled. check for the latest revision. materials 1. insulation sleeve: heat-shrinkabl e, transparent blue, radiation cro ss-linked modified polyvinylidene fluoride. 2. integral three-hole insert: low outgassing immersion resistant thermoplastic, color-natural. 3. separate three-hole insert: low outgassing immersion resistant thermoplastic, color-natural. 4. crimp splicer: base metal: copper alloy 101 or 102 per astm b-75. plating: tin per mil-t-10727, type 1. application 1. this assembly is designed to provide immersion resistan t 2 or 3 to 1 in-line splices wires having a total cma per side between 304 and 1510 and insulations rated for at least 135 c. 2. for requirements and assembly instructions, see ra ychem devices specification control drawing d-436-42/-43.
|
